TAG200BC
TAG200BC
Penta logo

TAG200BC

/ Standards
Penta BulletpointComplies with EDF-SPS technical specification n° 42
Penta BulletpointCE compliante
/ Use

• TAG200BC is designed to check presence or absence of nominal voltage on the voltage capacitive test points of elbows and cable terminals defined in standard NF C 33-051 of electrical installations with a nominal voltage between 3 kV and 36 kV.

• Its insulated and elbowed electrode allow removing, handling and re-placement the insulating caps on voltage capacitive test points.

• The elbow electrode has an “universal” end fitting for fixing and handling the detector at the end of an insulating stick adapted to the nominal voltage of the installation to be tested.
electrical-detection / TAG200BC 📁 / penta-catchprase-complement

Advantages
Penta Bulletpointpenta-pim-advantage-voltage/validation-of-autotest-and-watch-state-by-a-green-sight
Penta BulletpointThe presence of voltage within the calibrated range or above is indicated by a RED light and a beeping sound
Penta BulletpointThe self test checks all the circuits, the reference detection level and the battery voltage
/ Technical specifications
Penta BulletpointPower type : AC Voltage
Penta BulletpointElectrode type (mm) : Angled
Penta BulletpointEnd fitting : Universal (U)
Penta BulletpointColor : Yellow
Penta BulletpointNetwork frequency (Hz) : 50/60
Penta BulletpointUse condition : Indoor, Outdoor
Penta BulletpointTemperature of use (C°) : -20…+50
Penta BulletpointHymidity (Max) (%) : 96
Penta BulletpointBattery type : 9V battery (x1)
Penta BulletpointCase material : Polycarbonate
Penta BulletpointDimensions (mm) : 275 x 56 x 56
Penta BulletpointWeight (kg) : 0,45
Penta BulletpointPackaging : Soft case with conductive lining for EMC protection
Ask for Demo
Scroll to Top